Seamless Rolled Ring for Marine Engineering: Large-Diameter Components
Iraeta has manufactured bearing rings with an outside diameter of 15.01 m. Our bearing ring capabilities cover outside diameters up to 21 m and side widths up to 1.7 m.
A seamless rolled ring for marine engineering can serve as a bearing ring, driving ring, or offshore platform leg flange. These components combine annular geometry with application-specific profiles and finished interfaces.
Our custom seamless rolled rings include components manufactured as complete rings and rings intended for subsequent segmentation. For split-type slewing bearings, the manufacturing route can incorporate one-piece forming, heat treatment, and machining before separation.
Large-Diameter Bearing Rings
A large bearing ring includes both an overall annular form and detailed cross-sectional geometry.
The outside diameter establishes its scale. The inside diameter, axial height, section changes, and finished surfaces establish the component’s shape and interfaces.
Our bearing-ring product information lists the following manufacturing figures:
| Bearing ring capability | Figure |
| Maximum delivered outside diameter | 15.01 m |
| Maximum processable outside diameter | 21 m |
| Maximum side width | 1.7 m |
For an individual ring, the manufacturing review covers the complete combination of dimensions, material condition, profile, and finished features.
Our large-diameter bearing rings are manufactured around the component drawing. The required configuration may be a complete ring or a ring forming the basis of a segmented bearing assembly.
The machining reference includes the surfaces and features completed before delivery. Where later processing is planned, its requirements remain distinct from the delivered geometry.
One-Piece Ring Manufacturing for Split-Type Slewing Bearings
A split-type bearing can begin with a ring manufactured in one piece.
Our documented manufacturing route includes integrated forming, heat treatment, and machining of a complete ring before subsequent segmentation where required.
Forming the Complete Ring
The initial forming stage establishes the annular body and section.
The component drawing defines the principal diameters, axial height, and complete profile. For rings intended for segmentation, the technical reference also identifies the final configuration.
The complete ring remains the manufacturing basis for operations performed before separation.
Heat Treatment in the Integral Configuration
Heat treatment is incorporated into the one-piece manufacturing route.
The required material condition and applicable acceptance requirements are established for the component. The scope also identifies the condition needed before subsequent machining and segmentation.
Where treatment records or purchaser review activities are required, they are included at the relevant stage.
Machining Before Segmentation
Agreed machining operations are completed on the whole ring before separation.
The scope identifies the finished surfaces, local features, and component condition required at that point. Any work following segmentation remains separately defined.
The manufacturing route can be summarized as:
One-piece ring forming → Heat treatment → Agreed machining → Segmentation where required
The final configuration and division of subsequent work follow the individual component design.
Defining the Segmented Configuration
The final drawing establishes the relationship between the complete ring and its segments.
Relevant details include the segment arrangement, completed interfaces, remaining operations, and required condition at delivery. Inspection requirements are assigned to the manufacturing stage at which they apply.
This keeps the whole-ring reference connected with the final component arrangement.
Driving Rings for Marine Equipment
Our marine product range also includes driving rings.
These components require a complete section drawing and defined interfaces with the surrounding equipment. The product name alone does not establish their local geometry or machining requirements.
The manufacturing reference includes:
Principal ring dimensions.
Drawing-specific profiles.
Connection features.
Material and required delivery condition.
Finished surfaces.
Remaining operations, where applicable.
The machining scope follows the actual component details. Any working or connection features included in the part are shown on the drawing rather than inferred from a general application description.
Offshore Platform Leg Flanges
Our marine engineering applications include pile leg flanges for offshore oil and gas platforms, alongside components associated with FPSO mooring systems.
A platform leg flange has an annular connection form with drawing-specific faces and connection geometry.
The manufacturing reference establishes the flange section, principal diameters, axial dimensions, and hole arrangement where specified. Finished faces and other interfaces are coordinated with the adjoining equipment.
The supply boundary identifies which features are completed before delivery and which belong to later processing or assembly.
Material and project requirements are specified separately. Marine use and seamless construction do not, by themselves, define the required material condition or environmental suitability.
Finished Geometry and Component Verification
Marine ring components are verified against the geometry applicable at delivery.
For complete rings, the reference is the agreed one-piece drawing. For rings delivered after segmentation, it includes the required segment configuration and completed features.
| Component configuration | Verification focus |
| Complete bearing ring | Principal dimensions, section, and finished interfaces |
| Ring before segmentation | Agreed whole-ring condition and completed operations |
| Segmented component | Final configuration and specified segment features |
| Driving ring | Profile and connection geometry |
| Platform leg flange | Faces, dimensions, and connection details |
The inspection scope also identifies required material records, treatment records, and dimensional results. Purchaser or third-party activities are included where specified by the project.
Certification requirements are reviewed within their applicable scope and remain distinct from dimensional acceptance of the component.
Discuss a Marine Ring Configuration
Discuss your marine ring design with Iraeta, whether it calls for a complete bearing ring, a ring intended for segmentation, a driving ring, or a platform connection component.
Contact our team with the component drawing to review its section, final configuration, and manufacturing details.
Recommended reading
Unlocking the Secrets of Forging: The Performance Code of Classic Processes
Must-Read for Ring Forging: Advantages and Applications of the Forge-Rolling Process
Open-Die Forging vs. Ring Rolling: Helping You Choose the Optimal Forging Process